Detailed Dynamic JS Waterproof Coating () Description
Main Technical Capacity Index (Performance Chinese Standard
JC / T894 - )
The product is elastic coating; it uses the compound liquid such as
the acrylic acid colophony and the cement as the original source, and
adds the additional solvent to the product.
Product Characteristics
The coating is solid and has good adhesive effect; it has a fine
function of waterproofing, weather resistance, and endurance. It is usable in humid or
dry foundations of many building materials to form a large area of
waterproof membrane. The
service life is fifteen years. It integrates the waterproof and adhesive functions;
the waterproof layer can be directly adhered to the protective layer,
such as tile and mosaic. It can solidly adhere to with the
grouting mortar; it also can be added to the pigment to form a colored
coating layer.
Construction Standard
The product does not contain any organic solvent; it is environmentally friendly with no poison, no harm and no pollution; it also has the
advantage of easy use and short construction period. It is suitable to
waterproof the roof, and especially for the older housing maintenance. The extension rate
of mode JS - 1 coating is higher than the model JS - II coating; it can
be directly used in a humid and dry foundation.
Mode JS - II coating is suitable for the toilet and the swimming pool. The product is
suitable for all kinds of waterproof engineering and designed thickness.
Foundation processing: the waterproof foundation should be level, clean,
solid, without leakage or water; we should flatten the uneven
places and fill the cracks with grouting mortar.
The construction is three to five times, and the original cloth can be
added if necessary. When blending, we should correctly measure
according to the standard proportion (weight ).
Items for Attention
The reference usage amount: the deep membrane thickness1.2mm, usage 2.7kg / m2. We can add
a little water and evenly blend the coating with an electric blender.
We should not work in the rain, high - humidity and airless or below
zero centigrade, so as not to influence the forming of the membrane.
The water collection test should begin 48 hours after the membrane
construction.
When the temperature is 20 centigrade, after blending the liquid and
powder material, the usable time of the coating is three hours. When the mixture is solid, it
is unusable. If the temperature is lower, and if the temperature
is higher, the usable time is longer, the usable time is shorter. If the coating (especially the base ) has a
deposit; it should be evenly blended in time. The color material should be a medium inorganic material.
The coating's original color is off - white, it can be made into a
color coating layer by adding five to ten percent weight color
material.
We suggest the ferric oxide system materials, if you choose another
material; you should test them and make sure they are suitable. If it is used in the low temperature, the drying time is longer, high
humidity and bad airiness conditions, and
vice verso.
After the previous layer is solid, dry and not sticky, we can start to
work on the next layer. After the waterproof construction, we should carefully
check every part of the engineering, especially the weak parts; if
there are problems, we should immediately repair them. The used tools and vessels should be washed in
time. The coating
layer should have no cracks, no warp edge, no bubbling and no
separation of layers.
We have been a leading manufacturer and exporter of Dynamic JS Waterproof Coating ()
|
