Detailed Cover Tape Extenders Description
When a surface mount component tape, without leader (because it is a part reel
or a short ), is to be used on an automatic pick and place machine the cover
tape has until now had to be pulled back to feed it into the winding arrangement
of a tape feeder. This can now be avoided by using Cover Tape Extenders. This usually led to most of the components in the pockets thus
uncovered to be unusable.
Removing the cover paper reveals the adhesive side of the yellow tape, whose mark
is aligned with the front edge of the component tape and stuck unto its cover tape. There is enough length available not to have to discard
components in the process.
For 8 and 12mm belts
Size: 5 x 400mm
Boxes of 500 pieces
The non - adhesive, transparent end of the Polyester foil strip can now be fed
into the tape feeder. The bond between the Tape Extender and the original cover tape is sufficient to ensure that they will not separate, even after prolonged
time under tension. Three widths are available and packed in special cartons.
For 16mm belts
Size: 9 x 400mm
Boxes of 500 pieces
For 24mm belts
Size: 15 x 400mm
Boxes of 250 pieces
For 32 and 44mm belts
Size: 26 x 400mm
Boxes of 250 pieces
We have been a leading manufacturer and exporter of Cover Tape Extenders
|
